PARKSIDE X20V_Team Battery connector with Nickel strip contact
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PARKSIDE X20V_Team Battery connector with Nickel strip contact and powerfull Phoenix 20A power connector (terminal).
- Ocena
- 0 / 5
- Polubienia
- 46
- Pobrania
- 241
- Wydruki
- 0
- Wyświetlenia
- 4342
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
- Update: May 28, 2022. Connector base updated to version Base_01Ni_v1.3. Channel deep for Ni-strip is increased from 7 to 7,5 mm, for better fit.
- Update: January 13, 2022. Both details slightli updated for better finger grip.
- Update: July 28, 2021. A file added: Parkside battery system.pdf, (placed under Download package).
This is another version of my connector for Parkside tool battery.
The version with Faston terminals is here:
I need more powerful och versetile connector for Lidl's Parkside battery to connect different tools or electronics compatible with 20V (18V) battery system.
Lidl is a German international discount retailer chain, presented in EU and USA. The Parkside tools are quite cheap and of good quality as well as they tool's batteries, made of quality Li-ion cells. These batteries are unprotected though (except a fuse).
Instead of use of Faston terminal, here I have used a bit of nickel strip which is used to weld on Lithium-ion batteries. 0,25mm thick, ~7mm wide, ~70mm long. The strip is bend in middle and pressed toghether to get a double thickness in a length of aprox. 35mm. You need two of these contacts, one for “+” pole and one for “-”. I arranged each strip contact according to the groove's shapes in the printed base connector and pressed them into the grooves. Finaly, I secured each strip with quick glue. The end of the strip is used to solder wire, which goes to output Phoenix terminal/connector.
For output cinnector I used Phoenixcontact 20A power connector (terminal) DFK-PC 4/3-GF-7,62, part # 1840560. Benefit of this kind of connector is that it is a screw terminal and a connector at the same time.
Other material used:
- a bit of orange and black wire AWG20 (0,5mm2): orange for “+” and black for “-” pole. This short bits do not support 20A current, but that's not my intention either. If you need more power, use AWG16 (1.5mm2) instead.
- Two M3 x 10mm screws for DFK connector and four to fit printed connector support to the base. Here you may use four appropriate plate screw instead.
- two M3 nuts
- two end sleves, White (for AWG20 wire), TE Connectivity part # 966067-2.
- some kind of labels to mark output connector polarity. I used Brotherl's labels and label printer.
- Nickel strip may be obtained from Aliexpress or Amazon
Attached pictures will show you how I managed it.
Here are two print parts: Base_01N_v1.1 and Connector support. 0.15 or 0.2 mm layer height would be fine. I have sliced for 0.15mm.
Of course you may need to use some another type of output connectors, like common female DC 5.5x2.1mm. DC5.5*2.1mm output connector is here:
Distance between base fit holes are 55x 37 mm.
No print support material is needed.
Me on Thingiverse.