Air pistol holder - clamping on the table
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
air pistol holder which is fastened to the table by means of a screw, in the manner of a vice.
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 168
- Wydruki
- 4
- Wyświetlenia
- 1323
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
The air pistol holder functions as a vise, clamps to the table and the trigger of the pistol is inserted into the upper part and the pistol is held in the holder in this way.
Here are the instructions for printing the individual parts.
Parts:sverak na pistol cast1 and sverak na pistol sroub
Are printed from PETG with a filling of 20% and perimeter 2. Virtually without the use of supports, in the g-code I have supports made in only one hole, but even there practically does not have to be there.
Parts: sverak na pistol kolik and sverak na pistol sroub vrsek
are printed from flexi material TPU with filling to 8% and perimeter 2. Without the use of supports.
Used materials:
The G-codes below can be used on MK3. I used PETG materials from NEBULA and flex TPU materials from Devil Design