Attachment Mounting Track for Original Prusa Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting Track to allow for easy adding, removal, and switching of attachments or add-ons for Original Prusa Enclusure.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
This model is a mounting track which allows for easy adding, switching or removal of attachments.
----------------------------------------------------------------------------------------------------------------
Print Settings and filament used:
0.20 mm structural, Generic PETG preset, 20% Cubic infill, 3 perimeters.
Filament: Polymaker Polylite PETG.
----------------------------------------------------------------------------------------------------------------
Attachments will be added soon, but one that is already planned is a desiccant container. Possible attachments can include: tool storage, desiccant containers, camera mounts, etc.
Installation is simple, easy, and requires very little tool and hardware. Just a 2.5mm allen key (came with the enclosure) and a flathead screwdriver are needed for tools. The hardware required is only 2 m3nS nuts and 2 sockethead screws (I used m3x12, but shorter and longer screws can be used).
Installation video link: