Harry Potter Castle hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Harry Potter Castle hueforge Color Swap or AMS
- Ocena
- 5 / 5
- Polubienia
- 64
- Pobrania
- 255
- Wydruki
- 2
- Wyświetlenia
- 1253
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
This is a remix of Harry Potter Hogwarts by PAPA Emeritus IV - MakerWorld.
I changed the size to the standard 200x200.
Don't Forget the frame:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #12 (1.12mm) swap to Blue
At layer #16 (1.44mm) swap to Gray
At layer #22 (1.92mm) swap to Jade White for the rest.
Please "Like", review, follow and upload make.
I spend a lot of time designing and allow it all to be used for free (including commercially).
If you'd like to help me out, below are the possible ways. Thank you in advance!
https://www.buymeacoffee.com/dohara1985o
Venmo: Dohara1985
Paypal: @Dohara1985