Horizontal Thread Spool Holder for Singer 401 Slant-O-Matic Sewing Machine - 75mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my first published Thingiverse remix, now on Printables - thank you, jpo41 for the source and inspiration!
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 782
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my first published Thingiverse remix - thank you, jpo41 for the source model and inspiration! I adjusted the length of the spindle holder base to fit the spacing of my wife's Singer 401 sewing machine spindles and remixed the spindle arm holder to accommodate a different spindle type.
The remixed arm accommodates a 75mm long spindle with a 10mm inner diameter and 8mm inner diameter ring inset at one end of the tube - this ring catches the notches on the end of the holder and prevents the spindle from falling off the holder. We also found that some smaller spindles without inset rings can be held on by friction alone by sliding them onto the holder snugly.
Printed on our Prusa MINI+ in Prusament PETG - Lipstick Red
Category: 3D Printing