Vive Tracker Cheap Power Bank Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter that allows you to fix a cheap dollar store battery to a HTC Vive tracker and belt No hardware required!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 361
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Requires the power bank (seen in white, comes in many colors) displayed in image.
Example power bank: Aliexpress (No battery included)
The battery is simply slotted in, you need a decent tolerance for it as it is only held by tension.
The tracker screws into the top with a plastic thread, and the entire assembly screws into a
¼ inch 20 TPI screw (I used AMVR's 5PC tracker strap, but any standard camera mount screw or tracker belt should work)
No hardware is required for the print, it is print in place.
Printed in Overture Black PETG on a Creality K1 printer @300mm/s
0.2mm Layer Height
3 Walls (I recommend at least 3.)
5 Top Layers
15% Cubic Infill
Normal Supports (Painted under power bank slot only)
Do not print supports for the bottom screw hole!
I used Orca Slicer's Normal supports for the power bank slot, it's a bit tough to remove but I wasn't confident and had poor results with my PETG sagging without it.