Prusa XL-Lifting Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed in PETG. 4 Shells, 5 bottom & 6 top layers with 25% infill. Use supports!!
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 506
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I built and tested my XL 5 head on the kitchen table and needed to move it to my shop. Lifting the printer told me that it's very back heavy with all the components on the back side. I wanted to make the handles so it could be lifted by 2 people or 1 with a very strong back. I moved it my myself, threw my back out a bit because I put it down on a furniture dolly to roll it through the house to the shop. Then had to lift it back up. Not recommend. Use 2 people. I know, long winded description… Anyways, no bolts needed just slide it under away from all clamps and such like in the pictures, and away you go.