Modular Roomy Enclosure for ESP32 (Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In this remix the roomy enclosure is now 3 parts: the box, the lid, and the inlay with the mounting pins for the esp32.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 347
- Wydruki
- 1
- Wyświetlenia
- 1538
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The remixed roomy esp32 box is really great, if you want to have a bigger packaging, which allows to use pin heads and those breadboard wires which connect directly to pin head without soldering. In this remix I made this box more modular: it supports now a generic box, the lid, and additionally an inlay, which carries the pillars for the board.
I redesigned this in FreeCAD, and seperated the box and the pins/pillars which the esp32 sits on. This serves two purposes:
- Lid AND box are reuseable for different esp32 board formats (only change inlay)
- One can mount esp32 and do the cabling on the inlay outside of the box, which may make things easier
The inlay provided is for the AZ-Delivery esp32 board, but I added the FreeCAD files, it should be easy to adjust them to other boards.
The overall dimensions are approximately the same, but not exactly. The dimensions are 83x58x50mm for the open box and the lid adds 1.5mm on top. In general I reduced dimensions of wall, thickness etc a bit, as I found them to thick and to use less material.