Multicolor / Twotone Basic Board Cover - NO MMU! - Original Prusa Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print your Prusa Enclosure Basic Board Cover either Multicolor or just Twotone without the need of a MMU
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 74
- Wydruki
- 1
- Wyświetlenia
- 869
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I wanted the text and the buttons to be more visible, as I always had a hard time finding the buttons in the evening when there's just the enclosure light turned on.
I wanted to do it with two different colors along with the black base color, and without the need for a MMU (as I don't have one).
You basically add several manual color changes at the respective layers where needed and then modify the G-Code, by moving the color change to where you want it and add additional ones by hand where necessary.
I made G-Codes for MK4 and MK3S/+ for multicolor and two tone prints.
Multicolor:
- 1st color change at z0,80 after permimeter → change to color #1 (e.g. white)
- 2nd color change at z0,95 after layer change → change to color base (e.g. black)
- 3rd color change at z0,95 after permimeter → change to color #1 (e.g. white)
- 4th color change at z1,10 after layer change → change to color base (e.g. black)
- 5th color change at z1,10 after permimeter → change to color #2 (e.g. orange)
- 6th color change at z1,25 after layer change → change to color base (e.g. black)
- 7th color change at z1,25 after permimeter → change to color #2 (e.g. orange)
- 8th color change at z1,40 after layer change → change to color base (e.g. black)
Twotone:
- 1st color change at z0,80 after permimeter → change to color #1 (e.g. orange)
- 2nd color change at z1,10 after layer change → change to color base (e.g. black)
- 3rd color change at z1,10 after permimeter → change to color #1 (e.g. orange)
- 4th color change at z1,40 after layer change → change to color base (e.g. black)
- 5th color change at z1,40 after permimeter → change to color #2 (e.g. orange)
- 6th color change at z1,70 after layer change → change to color base (e.g. black)
During color changes you have plenty of time to check the print for strings or blobs and can clean them, also give your nozzle a soft wipe during the color changes to keep it clean, just be carefull to not move the printhead or printbed during this, or you'll end up with a layer shift.
The color changing fun starts around 10 minutes into the print, then it's just switching colors back and forth for a couple of minutes and after the last color change you can just let it run until it's finished.
Don't let manual color changes scare you, it's 100% doable and not that hard :-)
Who needs a MMU2/3 ;-)