Spool Holder - No Vibration - Top-Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Top mounted spool holder, Prusa Mini style
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 212
- Wydruki
- 1
- Wyświetlenia
- 2606
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a TUSH2 style filament cradle that eliminates the vibration caused by the spool rocking. Provides just enough resistance to roll smoothly under all condition. I provided the gcode for both a striped version and a solid color version. The 3mf will have the color changes but feel free to make it your own.
Requires 4 (608) Skateboard Bearings (22x7mm)
Assembly: Peel the supports off the rollers by twisting and pulling straight off. Peel the tiny brim off the c-clips. Assemble the bearings on the rollers and secure with the c-clips. Mock the arms with the rollers to set the spacing and mount to the top of your Prusa. Cut a 7½" [190mm] approx. piece of filament and thread through the front holes to form a filament guide.
Go back to PrusaPrinters.org and PLEASE share a pic of your print. Happy printing!