1 / 2
Display stand - Vintage Futaba M series transmitter — zdjęcie 1
1 / 2

Display stand - Vintage Futaba M series transmitter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Back in 1977 when Star Wars was just Star Wars, some of the droids were operated by using Futaba radio control…

Ocena
0 / 5
Polubienia
2
Pobrania
33
Wydruki
0
Wyświetlenia
279
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Back in 1977 when Star Wars was just Star Wars, some of the droids were operated by using Futaba radio control transmitters. This I found out whilst looking for info to build my own.

After tracking down the model, possible two versions, I decided it would be cool for attending events to be able to display my newly purchased M4 or M6 transmitter.

So I drew up this display stand.

I also drew up a front label which I will add later once I have made a few changes.

This was drawn up and printed on my works old and not very good 3D printer.

 

Notes:

As this can be printed flat, support and rafts are not required.
Infill only needs to be enough to support as the transmitter is not overly heavy.

Post-Printing

Here is my stand with R5's name on the front & the clubs name.

Components are simply super glued together.

 

Category: Hobby

Tagi