1 / 3
Stand for Xiaomi Mijia Electric Screwdriver — zdjęcie 1
1 / 3

Stand for Xiaomi Mijia Electric Screwdriver

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stand for Xiaomi Mijia Electric Screwdriver

Ocena
5 / 5
Polubienia
17
Pobrania
66
Wydruki
2
Wyświetlenia
576
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Standard Digital File License

Hello Everyone

I am sharing a stand for an electric screwdriver from Xiaomi Mijia. The stand includes the Xiaomi logo. It should be printed in the position shown in the photo in the gallery. 


When you complete the project, please share a photo and a comment. Thank you and have a nice day.


IMPORTANT - READ:
Please note that each printer is calibrated differently, has individual user settings, and each uses a different type and manufacturer of filaments.  I tested the project on PLA filaments from brands such as Polymaker, Bambu Lab, Fiberlogy and Spectrum. Each time the size after printing was perfect for the Stand. If you decide to print the Stand with a different material, pay attention to its shrinkage and the settings of your printer. Download a file for a size test print.

 

How to print ? :

  • Material : Any (I tested with PLA)
  • Layer Height : 0.2mm
  • Wall Loops : 2
  • Bottom Layers : 4
  • Top Layers : 4
  • Infill : 100% (I recommend infill it 100% to make the stand heavy and stable)
  • Seam Position : Back
  • Support : No
  • Brim : No