SV06 Tray Redeaux
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated Tray design to fit SavageLau's SV06 Tool Holder
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 42
- Wydruki
- 2
- Wyświetlenia
- 223
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by SavageLau's Tool Holder for the SV06, I redesigned the Tray to be more secure (It was always coming out whenever I removed the cutters). Also, as there was a space between the Tool Holder and the top rail of the frame, I increased the height of the tray to fill that space (which is about 17mm on my setup). This updated design better accommodates the length of all the tools (so they don't flop around).
It uses SavageLau's pin from the original to secure it to the frame.
Spots for all SV06 tools, 12 nozzles and one additional tool. Originally pictured is Toothbrush (which I've found to be not as useful as the bamboo tweezers I now store there).
I tapped the holes with an M6 bolt to help the nozzles thread in easier.
Printed with:
-PLA
-15% infill
-No Supports if printed in default orientation