Washington D.C. flag (no mmu required)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The flag of the capitol of the United States.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Public Domain
This is the flag for the city of Washington D.C. Fun fact, I found out that the flag's official dimensions are a bit longer then a standard flag. At my usual scale it would not fit on the Mk4 build plate due to the length. So I have printed it at 75% scale. If you are scaling the flag be sure to only scale the X and Y dimensions. Changing the Z height may change the number of layers and the colors may not be as opaque.
This model requires no filament switcher. There is just one manual color change needed. Start printing with white and switch to red at layer 16 (for 0.2mm layer height). See the included gcode if you are new to layer switching.