LEGO Captain America Shield Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
for hanging LEGO 76262 Captain America's Shield on a wall
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 406
- Wydruki
- 0
- Wyświetlenia
- 1569
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Public Domain
This is a wall mount for LEGO 76262 Captain America's Shield.
Overhangs are 45 degrees and should print fine without support.
The mount hangs on two pan-head screws, aligned vertically and 45mm apart. Mine were #8, which is roughly 4mm. You may want drywall anchors if you have old 3/8" drywall like me. Yes, I mix measurement systems sometimes.
The shield hangs on the mount by both of the black rails around the outside circle. You don't have to take it apart like I did for this picture but be sure to get it close enough to wall so that both rails are supported by the mount.
