Black and Decker PS130 Battery Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for PS130 12V Ni-Cd Battery
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 1
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall mount Battery holder for 12V Black and Decker Firestorm drill. Uses a standard Deck screw for wall mounting.
I reverse engineered the model from a PS130 replacement battery (that fits in and powers my drill) and from the original charger base.
v2: Adds a clearance slot modeled on the PS1MVC Fast Charger's wide center channel. Minor cosmetic changes were also included.
This corrects an oversight. The mount was designed for original PS130 and A9252 Black & Decker batteries, but the original geometry did not actually clear their tabs.
Most replacement batteries for these models have removed this keyway, but including it makes the mount more versatile. This ensures the design works for both the legacy OEM batteries and the newer third-party replacements.
See Notes for more detail.
Battery specs:
-Black & Decker's PS130 Stem Type 12V Ni-Cd Battery
-Compatible w/ Black & Decker A9252, Dewalt DC9071, probably more…
Printed with:
-PLA
-15% infill
-No Supports if printed in default orientation
-Use of a brim may or may not be necessary depending on plate and print settings.
(Inspired by Claimed4All's Ryobi Wall Mount 18v Battery Holder Double Triple)
NOTES:
The following is for informational purposes. When I originally designed this mount, I did not realize there was an extra keyway slot in the original design of the battery and charger. Thanks to
Шевченко Володимир, I have updated my design to accommodate those who may still have an original battery housing. If you have the more common replacement style battery shown in the first picture below, either design will work.
PS130 Replacement Style with no extra key way notch/groove. The one used for my initial design. |  |
PS130 Original Style with key way. |  |
PS1MVC Fast Charger - Used simply for visual confirmation that my mount was shaped correctly. Upon further notice, you can see that the receptacle is widened even beyond the needs of the Original battery's extra key way: |   |
PS160 (Slow) Charger - Original that came with the drill. Note the extra key way notch/groove: |   |
Drill Base. Also has a key way notch/groove: |  |