Benchy Display Platform Prusa I3 MK3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Show off your best or favorite 3D Benchy. This was just a quick Tinker Cad design.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 142
- Wydruki
- 3
- Wyświetlenia
- 1038
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Show off your best or favorite 3D Benchy. This was just a quick Tinker Cad design. It seems to work well on either side and Benchy hasn't fallen off after 48 hours of printing so I'll call it a success.
Print instructions
Licence: Creative Commons - Attribution - Non-Commercial Category: 3D Printer Accessories Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: Yes
Notes:
This seems to work best printed on its side with supports under the wedge and hex that lock into the top of the Z axis.
Edit May 2nd, 2018 The one I have printed on its side has curled slightly in the last week. The one printed flat with supports under the entire bottom has not curled. Printed flat is a lot more support material but may be better long term and the finish on the bottom surface really doesn't matter much to me.
It could also just be the cheep PLA I used for the prototypes is the issue with the curling and better PLA or PETG would not have the issue.