Dell Dimension XPS T___ Fan Duct/Shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement for the plastic part that routes air over the CPU. The one inside my system kept cracking and I got fed…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
A replacement for the plastic part that routes air over the CPU. The one inside my system kept cracking and I got fed up with trying to fix it.
I made this by taking measurements on the original piece with calipers and putting it into Fusion 360. It's not an exact perfect clone of the original, but to my eyes I can barely see any difference.
Note that this does not include the tabs that keep it in place. I didn't include them because they would've been more difficult to model and would've easily broken off. I've found that it stays on well enough without them. If you want to make a remix with the tabs added, the .step file is included.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Doesn't Matter
Infill:
Doesn't Matter
Filament:
HATCHBOX PLA
Notes:
I printed using supports, but the supports didn't actually touch the model. If your printer is reasonably in tune you probably won't need them.
PLA should be fine in this scenario as the air going through the heatsink barely gets warm.
Category: Computer