Rain Barrel Bung
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screw fitting bung for the side of a rain barrel
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 316
- Wydruki
- 1
- Wyświetlenia
- 1508
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
I started with drilling a hole in the side of my rain barrel to allow drainage, but I needed to put a screen over it to keep the bees out. So instead, I made this bung so I could put a screen fitting in place instead. Since then, I've made a screen fitting, a garden hose adapter, a ¾" NPT adapter, a ½" NTP adapter, and a 1" pool hose adapter. It's been quite handy. There's also a nipple in the 3mf to go from female to male, but I probably should have put a hex in the middle to gip it with cause it hurts your hand when you try to put it in.
Made from PETG. Message me for the fusion 360 file.