Amiibo spoof coins with case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These Coins are for housing NTAG215 NFC Stickers. I got mine here www.amazon.com/gp/product/B07MKWHYQK Here is a guide…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 354
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
These Coins are for housing NTAG215 NFC Stickers. I got mine here
www.amazon.com/gp/product/B07MKWHYQK
Here is a guide on how to set up the stickers https://www.reddit.com/r/Amiibomb/comments/5ywlol/howto_the_easy_guide_to_making_your_own_amiibo/
The top and bottom of the case are to be super glued together and the insert can slide in and out, clicking into place.
The top part of the case has a small wall that should brake away to allow the clip to move. This is there to allow bridging and eliminate the need for supports.
Print Settings
Rafts:
No
Supports:
No
Resolution:
.1mm or .2mm
Filament:
3D Solutech PLA
Notes:
Pause the print at 1.8 mm and put the NFC sticker in the middle of the coin.
I used a filament change to get the different colors but this is optional. Painting the coins also works.I added the STEP file of the template coin so if you want to make a new design you can.
Category: Video Games