Silver Bullion Coin Container
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for 1-ounce silver bullion coins.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 457
- Wydruki
- 3
- Wyświetlenia
- 1732
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a container for 1-ounce silver bullion coins. It will fit a stack of 10 American Eagle silver coins, but other coins of the same or smaller diameter may also fit.
I printed with random seam position to avoid an ugly vertical seam. I would strongly recommend sanding the seams on the inside of the container otherwise the coins may get scraped by those seams. I printed this on a Prusa Mini in PLA with a 0.4mm nozzle and 0.15mm layer height.
EDIT: I created a version 2 (Yellow/gold in the pics) that has a slightly smaller tolerance between the ID and OD threads and the notches on the outside are a bit bigger.