Shimano A01S/M06 bleed spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bleed block for Shimano brakes using A01S/M06 pads. List bellow found online, probably not full and can fit to other…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 283
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Bleed block for Shimano brakes using A01S/M06 pads.
List bellow found online, probably not full and can fit to other brands too.
Shimano BR-M975, BR-M965, BR-M966, BR-M800, BR-M775, BR-M765, BR-M665, BR-M601, BR-M595, BR-M596, BR-M585, BR-M535, BR-R505, BR-S501, BR-S500, BR-T665, BR-T605, BR-M665
Print Settings
Printer Brand:
RepRap
Printer:
Prusa i3 plus original kit
No
Infill:
50 % <
Notes:
In upright position the hold tab is small area and if printing only this model from ABS, there will be problem with layers not cooling fast enough. Better to add to plate with other models. When applied cooling fan slow still slightly warped.
Printing on side, need to support side tabs. Your pick.
Also possible to mod model (source uploaded) and get rid of tabs. Already successfully bleeded brakes using hex wrench as spacer tabs to keep spacer in center of caliper are not must have.
Category: Sport & Outdoors