Shimano G01S/G03S bleed spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed another peace of bleed block for my Shimano SLX brakes (M675) so just printed it. Should fit all brakes using…
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 168
- Wydruki
- 5
- Wyświetlenia
- 694
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Needed another peace of bleed block for my Shimano SLX brakes (M675) so just printed it. Should fit all brakes using G01S and G03S pads. List bellow found online, tested on M615
BR-M987 - BR-M615 - BR-R515 - BR-M985 - BR-S700 - BR-R315 - BR-M785 - BR-CX75 - BR-M675 - BR-RS785 - BR-M666 - BR-R785 - BR-M8000 - BR-M9000
Print Settings
Printer Brand:
RepRap
Printer:
Prusa i3 original kit
No
Supports:
Doesn't Matter
200 um
Infill:
50 % <
Notes:
In upright position the hold tab is small area and if printing only this model from ABS, there will be problem with layers not cooling fast enough. Better to add to plate with other models. When applied cooling fan slow still slightly warped.
Printing on side, need to support side tabs. Your pick.
Also possible to mod model (source uploaded) and get rid of tabs. Already successfully bleeded brakes using hex wrench as spacer tabs to keep spacer in center of caliper are not must have.
How I Designed This
Used piece purchased with set of M615 brakes as reference and replicated measurements.
Category: Sport & Outdoors