1 / 14
GoPro Hero 4, 2 Axis Gimbal for Reptile 500 MWC (Discovery Clone)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is 2 axis gimbal for the Reptile 500 MWC (TBS Discovery Clone). (http://www.aliexpress.com/item/REPTILE-MWC-X-…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 355
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
This is 2 axis gimbal for the Reptile 500 MWC (TBS Discovery Clone).
Designed explicitly for GoPro Hero 4 Black (86.3 gr) and other compatible size and weight cameras.
Printable parts, weight calculated with Nylon (PA-12) in mind.
- Base (12.4 gr)
- Roll Base ( 7 gr)
- Roll Link (11 gr)
- GoPro Cradle (15.5 gr), IMU board is per Storm32 BCG design, 16 x 19 mm with two holes 14 mm center distance. (Can be adapted to other IMU modules by breaking the 2 mm pins)
Additional parts needed aka buy parts:
- GMB2804 (100T) Motors, x2, (41.2 gr ea). http://rctimer.com/product-1075.html.
- Socket head cap screw, x1, M3x12. (https://mdmetric.com/fastindx/uc20_27.pdf)
- Socket head cap screw, x12, M3x6. (https://mdmetric.com/fastindx/uc20_27.pdf)
- Nut, Din934, x1, M3. (https://mdmetric.com/fastindx/ud02_11.pdf)
- Rubber mounts / balls, x5. (http://www.banggood.com/Diatone-Rubber-Damping-Ball-10pcs-For-RC-Multirotors-p-973470.html)
- [Storm32 NT Gimbal controller - Anything that can drive those motors (10 ohm)]
(https://www.banggood.com/custlink/DmDvdZLM0R) 7. Gopro strap or rubber band to secure the camera into cradle.
Please share you feedback, I will do my best to adjust if relevant.
Category: Hobby
