Revolution Counter Dial
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This counter can be connected to shaft where you can keep track on how many turns (up to 12) were made using knob.
- Ocena
- 0 / 5
- Polubienia
- 56
- Pobrania
- 135
- Wydruki
- 1
- Wyświetlenia
- 1784
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Description
Useful of you need to keep track on how many turns you made on a shaft or want to remember setting to quickly tune back to previous value.
Knob is directly connected to shaft and follows 1:1. Counter tracks knob revolutions and position.
Mechanism is compact, still numbers are 4 mm high, size without knob is 55x60x10, knob is 15x24 mm at its base.
My use is for tuning multi-turn capacitors, but can be used for any turning application.
This is an application on a model I made earlier; Freecad geneva wheel - parametric.
Build
- Please fill text pockets with paint before printing
- Print one piece of each STL no support needed
- Put together as in pictures, wait with Knob and Shaft
- Wiggle for little to cogs entering right fit
- Add Knob and Shaft last ande press together, that should be enough to hold it together
Depending on your application mount using the holes, add more holes and maybe glue together. The hexagonal shaft hole is R3 mm.
History
- 1.0 2024-01-06, First Try
- 1.1 2024-01-07, Fixed 3MF that had wrong genevadial
- 1.2 2024-01-07, Turned top dial 90 degrees so it appears centered
- 1.3 2024-01-07, Made centre pin shorter and stronger in Knob