1 / 14
Roborock S7, S8 mop, mob and water tank wall holder — zdjęcie 1
1 / 14

Roborock S7, S8 mop, mob and water tank wall holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Roborock S7, S8 3-in-one mop accessories wall holder for: mop, mob and water tank

Ocena
0 / 5
Polubienia
14
Pobrania
55
Wydruki
0
Wyświetlenia
1295
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Hi,

This is my Roborock S7, S8 3-in-one mop accessories solid wall holder for: mop, mob and water tank.

Easy to print and assembly.

The model consists of three parts: the body of the holder and 2 legs. It can be assembled using molding nuts or just metric screws, maybe double sided tape or glue will be enough ;-). I prefer molding nuts, (on photo) but it is up to you.

Holder can be attached to the wall using double-sided tape or screws. I made 4 versions so that you can choose the way of mounting and fixing.

The legs serve as a holder for drying the mop.

According to the appearance of spare parts for mop accessories, this holder is suitable for the following models:

  • Xiaomi Xiaomi Roborock S7
  • Xiaomi Roborock S7 Max
  • Xiaomi Roborock S7 MaxV
  • Xiaomi Roborock T7S Plus
  • Xiaomi Xiaomi Roborock S8
  • Xiaomi Xiaomi Roborock S8 +

I use the holder for my vacuum cleaner Xiaomi Xiaomi Roborock S7.

 

How to print:

I printed the holder without any problems from basic white PLA on the MK2.5S+ with 0.6 mm nozzle.

Follow bed orientation, use brim.

Perimeters: 4

Layer: 0.2

What needs to be printed?

1x body (the version you choose)

2x legs (left and right)

 

What mounting material will you need for assembly?

Molding NUTs versions:

4pcs molding nuts M4x6x6

2pcs molding nuts M3x3x4.2

4pcs screw DIN934 M4x10

2pcs screw DIN934 M3x5

 

DIN934 versions:

4pcs screw DIN934 M4x10

2pcs screw DIN934 M3x7

 

After assembling the holder, stick it to the wall with double-sided tape, or use 4 mm screws.

The grooves on the bottom of the water tank holder serve for better drying.

You can put the water tank in the holder the other way around

 

Enjoy and happy printing:-)

Tagi