1 / 2
Angle Adapter for @MroznyHipis Lego Stands — zdjęcie 1
1 / 2

Angle Adapter for @MroznyHipis Lego Stands

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Just a basic angle adapter for @MroznyHipis totally awesome Lego stands to be able to see the plates on higher shelves!

Ocena
0 / 5
Polubienia
11
Pobrania
33
Wydruki
0
Wyświetlenia
549
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Most of my Lego sets sit on higher shelves but I still wanted to be able to see the plates, so I made a very basic, quick print angle adapter to be able to still see the plates at eye level or above. 

In order to not obscure the view of the minifigs, I used 1 x 2 x 16 bricks to elevate the minifigs behind the plate. I've also had luck printing the stand offs from here https://flwe.nl/ppBricks/, though fit with the base can vary. I printed the bricks with a brim and left a tiny bit of the brim on the bricks for a good press fit with the base.  

Short side goes to the plate, long side sits on the base. I superglued the adapter to the plate but did not superglue to the base just in case I ever need to change. Nothing special on print settings.

All props go to @MronzyHipis for his amazingly awesome stands which can be found here: https://www.printables.com/model/267597-modular-display-stand-for-lego-star-wars-marvel-dc/comments

 

Tagi