Scuba hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A from scratch derivative with four 5/8" threads for DIN200 first stages and interlocking two-piece design.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 128
- Wydruki
- 2
- Wyświetlenia
- 2361
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
One needs to store scuba gear. One's fins, one's first stage, etc. This is a derivative of an earlier design of mine that was heavily inspired by the excellent work of Joakim Boneng of Norway. This design comprise of four 5/8 DIN200 thread to fix one's first stage on the hanger, and it comes with an interlocking profile that requires no glueing of the two pieces together.
0.2mm layers, with 3 perimeters and 5% infill with only one supported structure printed in PLA.
Enjoy!
PS: CAD files, stl and g-codes for Prusa MK3S
PSPS: Maybe, just maybe, a 101% uniform scale would yield better DIN connector tolerances…
PSPSPS: comments are always welcome, give it a try.