1 / 2
Prusa MK3/MK4 PEI metal sheet cover with magnets — zdjęcie 1
1 / 2

Prusa MK3/MK4 PEI metal sheet cover with magnets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Full enclosure cover for a Prusa MK3/MK4 PEI metal sheet with magnets

Ocena
0 / 5
Polubienia
2
Pobrania
20
Wydruki
0
Wyświetlenia
335
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Full cover for the MK3/MK4 PEI metal sheet in two parts.

To easily stack several covers and sheets on top of each other, each part has two cutouts for 10x2mm magnets.

https://www.amazon.de/dp/B06X977K8L

Glue in the magnets (one facing north, the other facing south) and the caps. For the cutouts, I was inspired by Slant 3D https://www.youtube.com/@slant3d/videos in his video “Design Better Holes | Improve Tolerances | Reduce Sagging | Design for Mass Production 3D Printing.”

Print two at once, standing diagonally on your MK4 sheet. I used a 5mm brim.

I used Fusion 360 to design it. I'm excited about your remixes.

Tagi