1 / 5
Tablet Monitor Mount v2 - Moe Betta — zdjęcie 1
1 / 5

Tablet Monitor Mount v2 - Moe Betta

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix of my original design to add rigidity and overall improve the design.

Ocena
5 / 5
Polubienia
19
Pobrania
248
Wydruki
0
Wyświetlenia
1017
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Download the one side. it will be the left side, then mirror it in your slicer. 

I printed these in .2mm with a .4mm nozzle.

I printed in white PLA.

No supports.

No brims.

 

Differences of the remix compared to the original

This is a remix of my original design to add rigidity and overall improve the design.

I wanted it to be a cleaner mount, with a tighter hold. I added a hole to allow the headphone jack to  pass through it. You only need to print one and mirror it for the other side. These fit my new Dell monitors. I have added a step file if you need to modify them to fit your monitor. I use 3m command strips to hold them on the monitor. I have had an iPad mounted like this for over a year now. They also don't damage your monitor if you take them off.

I was able to mount my Surface Go as well. So you should be able to use many tablets.

Tagi