Case for USB to One-Wire Converter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for USB to One-Wire Converter that can be used for example for temperature sensors with Digitemp application
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I am using DS18B20 temperature sensors in all rooms with Digitemp application on my home server. For many years it was through RS232 interface but time has come to upgrade to USB. This model is case for USB to 1-wire converter from Denkovi. No screws or any other material than the prined case is needed. Just connect your 1-wire devices and close the case. If printed right, the two parts will hold together. It will be quite difficult to open it again.
My printer settings for solid box without infill:
Prusament PETG Orange
0.4 mm nozzle
0.2 mm layer
6 perimeters, 8 bottom & 8 top layers