Modular Double Shelf Shower Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A free standing or wall mounted shower rack that can be used as a single tray or double rack. Includes hanging hooks.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 698
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
The model comes with a top tray and a bottom tray, as well as dowels to connect the two if you want to make a double shelf rack. A hanging hook is also included, which hangs off the face of the tray. There are holes to mount it on the wall, but it can still be used as a free standing storage rack if you'd prefer not to mount it.
Print Instructions
If you only want to print a single tray then I'd suggest printing the top tray as the dowel holes are filled in on the top. If you print the bottom instead, I've included some dowel plugs that you can print to fill in the dowel holes.
No supports needed, 0.2mm layer height works fine, if using a 0.4mm nozzle then make sure to have 3 wall loops on. Model should print fine in the original orientation.
Assembly Instructions
It's pretty straightforward - simply insert the dowels into the dowel holes (ideally with glue) and connect the two trays. The hook hangs off the front of the tray.
Edit: Added a larger diameter dowel rod for better support of the top tray. It still fits in the original dowel holes so no need to re-print if you've already printed the trays.