Audi A3/S3/RS3 8V QuadLock Phone mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Audi A3/S3/RS3 8V QuadLock phone mount.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 130
- Wydruki
- 0
- Wyświetlenia
- 1786
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
I'v adapted an existing phone holder to fit the quad lock ecosystem,
I used the head and nut from the vent mount of quadlock :
https://www.quadlockcase.ca/products/car-vent-mount?variant=39828860239947
BOM:
2X M4X8 SHCS screws
1X QuadLock nut and head*
1X M5X35 FHCS (optionnal)
1X M5 Nut (optionnal)
Optionally for added security you can change the center screw for a M5X35 FHCS and a nut to bolt the quadlock head securely to the mount.
Material:
I do not recommand using PLA to print any car accessories since there is a high possibility that it may melt during hot summer days.
I would recommand using at least PETG but ASA would be ideal. Since it is more UV resistant
Printer:
You will need at least a 225mmX225mm bed to print it in one piece. You will need to rotate it 45 deg to fit.
*I would recommand against printing the head itself, I have some reservation concerning the strength especially since the head will be printed standing up (Z) and I fear it might not hold.