1 / 1
Extension for the NeaterFeeder Express
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extension to raise the height of the NeaterFeeder Express
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
NeaterFeeder Express was too short for my dog, but the company only makes an extension for the more expensive NeaterFeeder ($80 + the extension), so I quickly threw this together in TinkerCAD to raise it approximately 6 inches off the ground for a better height match.
I did 6 top layers, 3 bottom layers, 3 walls, and 10% infil with just some old PLA I had. Could be better with the pieces curved to match that of the NeaterFeeder's feet, but it's rock solid and doesn't feel like it's going to fall over at all.