Rajas of the Ganges - Tile Container
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple tile holder for Rajas of the Ganges. With a hole at the bottom so you can see which animal type goes where.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 502
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple tile holder for Rajas of the Ganges. With a hole at the bottom so you can see which animal type goes where, as well as to save filament.
For the lid, I recommend using the trick of having no bottom / top layers, and using the infill settings to fill out the shape. Feel free to do so on the container as well. Basically go to the Print Settings in Prusa Slicer and change the number of Solid Layers to 0/0 (Bottom/Top).
Then any "solid surface" will print with however you set up your infill. And you change that in the "infill" category of the print settings!
You'll need 4x printed.
They fit both all promo tiles from Goodie Box 1 and 2, and I left a bit of a gap at the top to fit 2-3 more tiles in each section.