1 / 2
Fazua Energy 430 Akkuhalter / battery holder — zdjęcie 1
1 / 2

Fazua Energy 430 Akkuhalter / battery holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Akkuhalter / battery holder

Ocena
5 / 5
Polubienia
6
Pobrania
68
Wydruki
3
Wyświetlenia
520
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Muss zum Laden den Akku aus dem Rad entfernen, bevor dieser am Boden rumliegt habe ich eine Wandhalterung gezeichnet.

Bei der Montage muss beachtet werden das der Abstand zwischen Unterteil und Klammer min. 250mm betragen muss. Siehe Bilder. 

Gedruckt in Extrudr PETG, 6 Wandlinien und 40% Infill.

 

 

As I have to remove the battery from the bike to charge it before it lies on the ground, I have designed a wall bracket.

When mounting, please note that the distance between the lower part and the bracket must be at least 250mm. See pictures.

Printed in Extrudr PETG, 6 wall lines and 40% infill.

Tagi