LED christmas star | LED weihnacht stern Licht Weihnachtsstern
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Christmas Star you can look at the photos, it's for an "normal" LED strip. When you scale it in the slicer - it's not…
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 240
- Wydruki
- 0
- Wyświetlenia
- 1205
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Public Domain
Christmas Star
you can look at the photos, it's for an "normal" LED strip. When you scale it in the slicer - it's not possible to put the LED strip inside. On my building, i glue the button and top together with superglue. I connect the corner together with a silver wire.
It's from side-to-side 230mm big - so you can print on 245mm bed. The Top have only 2 layers, so the light go trough.
Weihnachtsstern
Wie ihr sehen könnt, passt ein "normaler" selbstklebender LED Streifen rein. Falls ihr vorhabt den Stern kleiner zumachen im Slicer, wird der LED Streifen nicht mehr passen. Ich habe die Ecken mit Silberdraht verbunden. Der Stern hat ein Durchmesser von 230mm, er ist also auf einem 245mm Druckbett druckbar. Der Deckel hat zwei Layer, also das Licht kommt bei einem weißem Filament super durch.
Have fun and marry christmas :)
Viel Spaß und frohe Weihnachten :)
Print Settings
Printer Brand:
Anycubic
Printer:
Vyper
Filament: all PLA white
Category: Art