1 / 20
The Taverns of Tiefenthal incl. expansion Insert — zdjęcie 1
1 / 20

The Taverns of Tiefenthal incl. expansion Insert

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Organize the boardgame Taverns of Tiefenthal including its expansion with this insert

Ocena
4,2 / 5
Polubienia
40
Pobrania
380
Wydruki
5
Wyświetlenia
1893
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

TL;DR: No-lid-lift, suitable for vertical storage, fits sleeved cards (see last page of pdf), fast setup and teardown insert for the boardgame ‘The Taverns of Tiefenthal’. 

Pro Tip: shuffle the required components during re-storing into the box for an even faster setup next time. 

IMPORTANT - in case there are differences in game boxes, I used the German version from Schmidt Spiele as a reference. 

IMPORTANT 2: The 3mf-files are not slicer-project files! They are exports from F360 and contain only pre-cut model data!

 

In case you want to obtain a commercial license - consider joining my club here on printables.  All files for purchase are included in the commercial license already.

Finally, I would appreciate it if you left a like and after printing provided a rating - this would help me further improve myself.

 

As for the other inserts I create, I aim for the following (in priority order):

  • Enhance step and tear-down part (goal: setup should never take longer than a refresh of the rules to the game)
  • Opted to store the majority of sleeved cards (specific sizes of trays see uploaded pdf)
  • The game box can be stored horizontally or vertically
  • Try to be as lightweight and resourceful as possible - but functionality wins
  • No Support needed

 

A few key items (further information on printing see uploaded pdf):

  • Printing requirement: 0.4 nozzle, Arachne Wall Generation, largest printing object is  216mm or 190mm (if you use ALT_files) - in case it needs to be smaller, you can contact me and I will try my best
  • I normally print without Top/Bottom layers and between 10 and 15% Honeycomb infills and 2 walls to achieve the look you can see in the pics. In case there are icons/information (e.g. card trays), I only print without Top/Bottom layers up to 2mm in height.
  • If you use PrusaSlicer/BambuSlicer or forks of it (i.e. I use OrcaSlicer) I suggest that you load the 3mf-files - those are pre-cut and names contain additional printing information
  • All those settings result in appr. 750g of filament needed for the whole print
  • In case you don't have the expansion and/or also don't plan to get it - you can substitute the bottom trays (except the one card tray) with a block of 216x290x15mm of a suitable material (e.g. foam, carton, etc)

 

As always, I love suggestions & feedback to improve further.

Have fun printing.

Tagi