1 / 3
Relais Gehäuse für Platine mit 2 Relais
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ein Gehäuse um die Relaiskarte sicher betreiben zu können.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Die Schrauben für die Platine sind M3x6 und werden direkt in das Plastik geschaubt.
Für den Deckel werden M3 Heat inserts verwendet.
Die Löcher für AC Kabel haben 8mm ø
Das Loch für GPIO Kabel hat 4mm ø