1 / 4
Guzzanti GZ 123 - Spigot for filling and emptying — zdjęcie 1
1 / 4

Guzzanti GZ 123 - Spigot for filling and emptying

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement spigot for filling and emptying of the ice maker Guzzanti GZ123.

Ocena
0 / 5
Polubienia
0
Pobrania
15
Wydruki
0
Wyświetlenia
123
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
GNU General Public License v3.0

Drop in replacement part for the ice-maker filling and emptying spigot on the left side.
Back cover of the machine has to be removed for installation of this part.

Fully compatible with the original silicone plug and M11 cover nut.

Base has place for two M3 nuts, preferably with nylon to prevent loosening when compressor kicks in.

Separated into two parts for optimal layer orientation of different parts.

  • the threaded tube and hose barb are to be printed “standing up” for strength and water tightness
  • the base is to be printed in the final installation horizontal direction, to keep the layer perpendicular to screw direction.
  • can be bonded with CA glue