1 / 2
Funnel Holder Toolbox Toilet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds Funnels and can thread standard coke bottles in the screw at the bottom.
- Ocena
- 5 / 5
- Polubienia
- 161
- Pobrania
- 751
- Wydruki
- 3
- Wyświetlenia
- 5769
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 8)Remiksy (0)Kolekcje (178)Powiązane
I created this funnel holder as a kind of blueprint for the question from this reddit thread:
https://www.reddit.com/r/3Dprinting/comments/190hdsp/can_anyone_find_this_stl/
I am very new to 3D modelling, as you can see, this is my first upload. I tried to make the model parametric. I used a lot of parameters, so I highlited the ones you should need to adjust the part to fit your needs.
By adjusting only the parameters
- height_thread
- height of the bottom part, where the thread is located
- wall_thickness
- thickness of the funnel and the thread part
- d_hexagon
- width of the hexagonal inserts on the back of the part to insert magnets
- depth_hexagon
- depth how deep the wholes are
- d_top_inner
- inner diamater of the funnel holder on the top. as the angle of the funnel is in reference to the bottom part and top part to always create a 45° angle, you should only have to adjust this one to your liking. If you need another angle, you'd have to change my way of parameterization
you should be able to adjust it to your needs.
I have not printed it, so good luck with the model.