MMU2 Frame Holder 30 degree
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the original Prusa part. In my setup, the 45 degree angle on the MMU2 encouraged the hot end wire…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 113
- Wydruki
- 2
- Wyświetlenia
- 599
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a remix of the original Prusa part.
In my setup, the 45 degree angle on the MMU2 encouraged the hot end wire bundle to rub against the PTFE tubes. I have ideas for a few alterations to make to improve the PTFE tube path and how it fits with the printer, and this was the first to be completed.
BTW, I was not aware how much filament and crud had built up on the MMU feeder gears. After a good cleaning, the MMU is working like new again.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3 MMU 2
No
Supports:
No
300
Infill:
20
Filament:
Prusament PETG Jet Black
Notes:
Lay flat and print. No supports required.
Category: 3D Printer Accessories