1 / 6
LM2596/LM2577/XL6009 buck DC converter enclosure
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hello, this is a remix from: https://www.thingiverse.com/thing:1625233 I changed the dimensions a little bit and…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 146
- Wydruki
- 0
- Wyświetlenia
- 503
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (22)Powiązane
Hello, this is a remix from:
https://www.thingiverse.com/thing:1625233
I changed the dimensions a little bit and changed the part to make it easier to print.
I also added a locking mechanism so that you don't need a cable tie anymore.
I also added the stp model, so everyone can customize the part by himself.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20
Filament:
PETG or ABS
Notes:
For higher loads recommend to print in PETG or ABS