Onewheel Pint Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Onewheel Pint vertical stand for home use. Designed to hold the board vertical for storage/charging. Fits on the MINI.
- Ocena
- 4,929 / 5
- Polubienia
- 102
- Pobrania
- 1154
- Wydruki
- 19
- Wyświetlenia
- 4203
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked shk1d29's stand, but it would not fit on my Prusa Mini. So, I combined it with TH-Props to make an ultimate combo of the two. Identical to TH-Props's stand, but with the downward slopes to center & stabilize the board from shk1d29's design.
Note - This version is for a Onewheel without float plates or cobra pad.
Link to TH-Prop's design: https://www.thingiverse.com/thing:3273259
Link to shk1d29's design: https://www.thingiverse.com/thing:3984298
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.25
Infill:
20%
Filament:
Prusament PETG Carmine Red
Notes:
* 3 lines of shell and 14 top and bottom layers.
- Also, make sure to print on it's side for best strength. *ABS is probably best, but PETG is what I had on hand and it works fine.
Category: Sport & Outdoors