Ikea Lack Cable Port for Prusa i3 MK3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When adding the cement paver to my Ikea Lack enclosure the PSU cord would not reach anymore.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 30
- Wydruki
- 1
- Wyświetlenia
- 830
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
When adding the cement paver to my Ikea Lack enclosure the PSU cord would not reach anymore. I printed a flipped version of the PSU mount and mounted it to the side of the enclosure instead of the back and then cut out a small port hole for the PSU cables to go through. I didn't want the cables to rest against the cut out part of the plexi so I made this for it. The plexi needs to be cut 14mm wide and 18mm tall with a rounded top. I used my Dremmel with a grinder to make the hole.
Print instructions
Licence: Creative Commons - Attribution Category: 3D Printing Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: Doesn't Matter
Resolution: .20
Infill: 20%