Modern Style Polymer AR15 22lr Conversion Magazine cold M3 nut insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very slight modification to GonzoStrange's amazing 22LR magazine for AR15 conversion bolts. I'm not a fan of heat…
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 296
- Wydruki
- 0
- Wyświetlenia
- 2196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A very slight modification to GonzoStrange's amazing 22LR magazine for AR15 conversion bolts. I'm not a fan of heat inserts, it's entirely possible I'm just no good at sinking them and seating them, but I much prefer printing-in nuts using strategically timed filament changes in PrusaSlicer. ASA doesn't like this method, once I open up my printer enclosure the print starts warping immediately so I also designed a version where you simply push the nuts in from the side.
The Hatchbox ASA I'm using isn't the best at bridging, so I have supports enabled for the mag catch window using PrusaSlicer paint-on supports. All the rest prints great with adaptive/variable layer height enabled and set to 0.36 ratio.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 Max
Rafts:
No
Supports:
Yes
Resolution:
Variable
Infill:
10%
Filament: Hatchbox ASA Brown
Notes:
I'm only printing in ASA because it gets ridiculously hot where I live and PLA is useless outdoors from Feb to Nov. In the pictures you'll see brims on my prints, as ASA likes to warp off the bed. If you have adhesion issues you will need to use a brim for the magazine body.
Category: Other