1 / 4
Top Paw Dog Bowl Riser — zdjęcie 1
1 / 4

Top Paw Dog Bowl Riser

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A riser for Top Paw brand dog bowls.

Ocena
0 / 5
Polubienia
18
Pobrania
131
Wydruki
0
Wyświetlenia
644
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

My dogs are aging and to alleviate any potential back/neck problems, I created two risers for their dog bowls. According to my more animal-knowledgeable spouse, this also helps prevent our canine friends from inhaling too much air during meals helping alleviate any gastric issues.

Files include the bowl holder and two types of “risers”. 

  • Small riser for more ‘down-to-Earth’ dogs.
  • Larger riser for medium-sized dogs.

Both risers fit in the underside of the bowl holder in the recessed area squares, tolerances are extremely loose. Add a little super glue to the recessed areas for the risers and you're set. I also recommend some sort of rubber stoppers on the bottom to prevent the bowls from sliding all over the floor during meals! (I printed some simple circles out of TPU).

No supports needed!

 

I printed the ones shown in pictures with 5% infill and have been using them without issue, of course this will depend on your printer.

*Designed for 26FL OZ (769mL) ceramic Top-Paw Dog Bowls similar to these:

Tagi