Planter With Merkaba and Flower of Life Pattern
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hey y'all. This is a little merkaba/flower of life planter I made a while back that I totally forgot about. Enjoy!
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 321
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hey y'all. This is a little merkaba/ flower of life planter I made a while back that I totally forgot about until I stumbled upon it in my files the other day. I did a test print and it turned out beautifully. So here it is for any and all who want it. It can be scaled to about any size but as is, it comes in at around 70mm square once its on the tray. Perfect for succulents and other small plants. Warning: the drainage tray in not infinite. Be careful when watering.
I used Amolen Series S Filament. I love it!
I personally ran the print in the pictures using the following settings:
0.4mm nozzle
0.16mm Layers
3 walls
4 Solid Top/Bottom
6% Gyroid Infill
55 mm/s Outer Wall/ Top Surface( For Silks)
255 mm/s Inner Wall
Feel Free to Experiment. Enjoy!