Our Glowing Hearts Original LED Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A base for the Original LED Neon Hero Hearts
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I got the Original LED Neon Hero Hearts as a gift but the base provided seemed really unstable. So I made a custom base to provide some more support. This is my first ever model built using FreeCAD and published. I was learning as I went through the process of building this. I hope anyone else out there that needs a base will find this helpful.
The steel base plate which is provided just slots into this printed base and should be sturdier than without it. My main concern was the light tipping over.
Printed mine with an X1C using a green Overture PLA+:
- 10% Gyroid Infill
- 2 wall loops
- No supports used
It is a pretty basic print effectively just a box with base plate taken out and small relief hold for the screw on the underside.
Happy printing.
Update (Jan 13 2024): I've added a file for the mini version of the lamp which is just a bit shorter. The base plates between the two lamps are the same so pick the one you prefer!