SUMO Enclosure by 3D SOURCERER | Made for Prusa XL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully enclosure your Prusa XL - compatible with all configurations and variations of the Prusa XL
- Ocena
- 4,889 / 5
- Polubienia
- 180
- Pobrania
- 1158
- Wydruki
- 22
- Wyświetlenia
- 7891
- Oceny
- 18
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
IF YOU ARE ENCLOSING A PRUSA XL PURCHASED BEFORE JUNE 1, 2024 AND YOU ARE PLANNING TO PRINT WITH HIGH-TEMPERATURE MATERIALS, PLEASE FOLLOW THE INSTRUCTIONS OUTLINED VIA THE LINK BELOW
CLICK HERE FOR PRUSA XL ENCLOSURE PREPARATION
THERE ARE MULTIPLE DIFFERENT CONFIGURATIONS OF PRUSA XL PRINTERS, SO PLEASE VISIT OUR WEBSITE BEFORE PRINTING TO DETERMINE WHICH FILES YOU SHOULD PRINT.
CLICK HERE TO VISIT 3D SOURCERER WEBSITE
UPDATES: 10/8/2025
- updated filament holder and spacer files
- added new filament spacer files for filament holder attached to rear aluminum profile
UPDATES: 12/19/2024
- added website page outlining recommended parts to be reprinted in PCCF for Prusa XLs pruchased before June 1, 2024
UPDATES: 11/14/2024
- updated the LCD PLATE file to support the new injection molded LCD mount that is shipping with the new Prusa XL units
UPDATES: 3/28/2024
- updated PRINT 2 ALT & PRINT 8 ALT to accomodate different bolt locations on right vs left arms of the Prusa XL
UPDATES: 3/28/2024
- updated PRINT 2 ALT & PRINT 8 ALT to accomodate different bolt locations on right vs left arms of the Prusa XL
UPDATES: 2/10/2024
- added PRINT 2 ALT for access to the belt-tightening bolt
- added PRINT 8 ALT for an accent plate that covers the hole in PRINT 2 ALT
- added STEP and FUSION files of the plate for easy customization
UPDATES: 1/22/2023
- added MAGNET PUSHER for pushing magnets into place (SUMO PRINT 1)
- added HEX GRID PLUG for reducing airflow through the hex back panel (PRINT 6 - HEX BACK PANEL ONLY)
UPDATES: 1/17/2023
- added TEMPLATE - UNDER SHRAPNEL for placing shrapnel nut on Step 75 of Assembly Guide (SUMO PRINT 1)
- added DOOR KNOB FRONT WITH SUMO files (SUMO PRINT 2)
- fixed missing chamfer on DOOR KNOB BACK (SUMO PRINT 2)
UPDATES: 1/10/2023
- added Print 7 Alternates as described on the website
- added STEP & Fusion files for HINGE SET (Print 8)
- interactive assembly guide updated
A fully animated, step-by-step assembly guide is also available on our website.
This print set requires approximately 3kg of filament, but if you want to print part of the enclosure with an accent color, you will need about 2.5kg of the primary color (blue seen above) and about 500g of an accent color (black seen above).
The SUMO Enclosure kit is available for $299.99 via Amazon Prime (with free shipping with Amazon Prime). The kit is also available through our website.
CLICK HERE TO PURCHASE ON 3DSOURCERER.COM
CLICK HERE TO PURCHASE ON AMAZON
Additionally, this kit is compatible with most DELACK Enclosure Accessories, offering a wide range of customization options, including mounts for cameras, a fire alarm holder, and multiple fan/filter configurations.
Thank you for your support!